Dr. Onur Gök

Publications

Peer-reviewed journal articles and international conference papers, most recent first.

Journal articles

15 articles. Index and quartile are given as labels.

  1. Effect of stacking architecture on the low-velocity impact behaviour of carbon fibre reinforced polymer plates. A physics-informed screening framework based on lamination parameters, orientation entropy and an interface mismatch relation
    Gök, O.
    Polymer, 363, 130590
    SCIEQ12026doi.org/10.1016/j.polymer.2026.130590
  2. Effect of Curvature Height on the Low-Velocity Impact Behaviour of Unidirectional T300/5208 CFRP Laminated Shell Panels. A Comparative Numerical Parametric Analysis of Intralaminar plus Interlaminar and Intralaminar-Only Models
    Gök, O.
    Polymers, 18(11), 1290
    SCIEQ12026doi.org/10.3390/polym18111290
  3. Low velocity impact behaviour of filament-wound GFRP tubes. Combined effects of winding angle and layer number supported by a Hashin-based cohesive finite element model
    Güven, Z. K., Madenci, E., Gök, O., Gemi, L.
    Composite Structures, 397, 120869
    SCIEQ12026doi.org/10.1016/j.compstruct.2026.120869
  4. Integrated Multi-Physics Design of a GGG40 Agricultural Trailer Wheel Hub. Concurrent Topology Optimisation and CFD-Based Lubrication Enhancement
    Gök, O.
    Lubricants, 14(5), 207
    SCIEQ22026doi.org/10.3390/lubricants14050207
  5. A Flow-Bench-Supported, Configuration-Additive CFD Framework for Decoupling the Hydraulic Loss and Regulator Load of an Integrated Irrigation Hydrant. A Comparison of the Conventional and Redesigned Bodies
    Gök, O.
    Liquids, 6, 31
    ESCIScopus2026doi.org/10.3390/liquids6030031
  6. Numerical and Experimental Characterization of an Aerodynamically Redesigned Disc in a DN350 Double-Eccentric Butterfly Valve in Terms of Flow Coefficient, Pressure Loss and Hydrodynamic Disc Load
    Gök, O., Ertaş, H. A.
    Black Sea Journal of Engineering and Science, 9(5), 2288–2306
    TR Dizin2026doi.org/10.34248/bsengineering.1982654
  7. Effect of Stacking Sequence on the Low-Velocity Impact Behaviour of T300/5208 Carbon/Epoxy Laminates. An Intralaminar Hashin-CDM Based Numerical Study of Eight Configurations
    Gök, O.
    Black Sea Journal of Engineering and Science, 9(4), 2094–2107
    TR Dizin2026doi.org/10.34248/bsengineering.1962591
  8. Experimental and Numerical Investigation of the Plastic Region Behaviours of AA 1100 and AA 7075 Aluminium Alloys at Different Velocities and Energy Levels
    Gök, O., Kayrıcı, M., Demirci, M. T.
    Tehnički vjesnik, 32(3), 201–208
    SCIEQ32025doi.org/10.17559/TV-20240725001880
  9. Investigation of Aerodynamics Behaviors, Shape of Feathers on Traditional Turkish Archery
    Büyükcura, A., Gök, O., Neşeli, S.
    International Research Journal of Innovations in Engineering and Technology, 8(6), 81–87
    2024doi.org/10.47001/IRJIET/2024.806010
  10. Investigation of Mechanical Properties and Damage Development of Filament Wound GFRP Composite Pipes by Ring Tensile Test
    Gemi, L., Azeem, M., Yazman, Ş., Kayrıcı, M., Gök, O.
    Necmettin Erbakan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 6(1), 93–104
    TR Dizin2024doi.org/10.47112/neufmbd.2024.34
  11. Comparative Numerical Analysis of Three-Dimensional Flow in the Opening Process of the Single-Disc Butterfly Valves
    Gök, O., Ertaş, H. A., Kayrıcı, M., Gökmeşe, H.
    International Research Journal of Innovations in Engineering and Technology, 7(7), 189–195
    2023doi.org/10.47001/IRJIET/2023.707029
  12. Casting of AA 7075 Aluminium Alloy into Gravity Die and Effect of the Die Preheating Temperature on Microstructure and Mechanical Properties
    Gökmeşe, H., Bülbül, Ş., Gök, O.
    Tehnički vjesnik, 28(3), 948–955
    SCIEQ42021doi.org/10.17559/TV-20200819135453
  13. Mathematical modeling and production of semi-active hand prosthesis from clear resin
    Kayrıcı, M., Uzun, Y., Arıkan, H., Gök, O.
    International Advanced Researches and Engineering Journal, 5(2), 171–180
    TR Dizin2021
  14. Effect of Different Loads on Fatigue Strength of 1040 Steel Materials After Design and Manufacturing of Rotating-Bending Fatigue Test Device
    Gökmeşe, H., Gök, O.
    American Journal of Engineering Research, 9(11), 121–127
    2020
  15. The effect on hardness and density of filling materials in NR/SBR rubber compounds
    Bülbül, Ş., Akçakale, N., Gökmeşe, H., Gök, O., Yaşar, M.
    International Advanced Researches and Engineering Journal, 1(1), 1–4
    2017

Conference papers

10 papers, full text and oral presentation.

  1. Numerical Investigation of the Effect of Simultaneous Rounding of Inner and Outer Corner Geometry on Drag and Pressure Loss in an In-Channel Obstacle Array
    Gök, O.
    9th International Black Sea Modern Scientific Research Congress, Düzce, Türkiye
    2026
  2. Numerical Investigation of the Effect of Fin Number and Surface-Feature Architecture on the Convective Heat-Rejection Capacity of a Brake Drum under a Constant Surface Temperature and Fixed Rotational Speed
    Gök, O.
    ARCENG International Uludağ Scientific Studies Congress
    2026
  3. Numerical Investigation of the Effect of the Branch Junction Fillet Radius on Flow Distribution in a Multi-Outlet Distribution Manifold
    Gök, O.
    8th International Conference on Frontiers in Academic Research, ICFAR 2026
    2026
  4. Numerical Investigation of the Rotational-Speed-Dependent Convective Cooling Performance of a Finned Brake Drum under a Fixed Surface Temperature
    Gök, O.
    ASES V. Fırat Bilimsel Araştırmalar Kongresi
    2026
  5. Investigation of the Plastic Region Behavior of AA 1100 Material
    Gök, O., Kayrıcı, M.
    5th International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, IMSMATEC 2022
    2022
  6. Elektromobil Kompozit Şasi Tasarım ve İmalatı
    Arıkan, H., Şan, E., Kayrıcı, M., Gök, O.
    International Aluminium-Themed Engineering and Natural Sciences Conference, IATENS 2019
    2019
  7. Fiber Takviyeli Polimer Kompozit Malzemelerin Sonlu Elemanlar Analizinde Kullanmak Üzere Malzeme Modellerinin Geliştirilmesi
    Kayrıcı, M., Tursun, H., Arıkan, H., Gök, O.
    International Aluminium-Themed Engineering and Natural Sciences Conference, IATENS 2019
    2019
  8. 1050 Al Alaşımlarının Darbe Davranışlarının Deneysel ve Nümerik Olarak İncelenmesi
    Kayrıcı, M., Gök, O.
    International Aluminium-Themed Engineering and Natural Sciences Conference, IATENS 2019
    2019
  9. Investigation of Microstructure and Hardness after Normalization Heat Treatment Applied to Hardox-400 Steel
    Bülbül, Ş., Gökmeşe, H., Arıkan, H., Gök, O.
    International Advanced Researches Engineering Congress, IAREC 2017, 1(1), 249–252
    2017
  10. Permanent Mold Casting Simulation and Experimental Investigation of AA 7075 Aluminum Alloy
    Gökmeşe, H., Bülbül, Ş., Arıkan, H., Gök, O.
    International Advanced Researches Engineering Congress, IAREC 2017, 1(1), 253–256
    2017